Table of Contents
Advertisement
Device
Specifies the physical device attached to each port. Devices include
printers, workstations, network links and remote logins.
Connect
Specifies whether the device is directly connected to the port or via a
modem.
Note: For network links, when the connection is done via the modem,
the number to be dialed is stored in the modem itself. For more
information, see the NAC 2 Installation Guide (NTP 553-4011-110),
"Peripheral devices" chapter, "Network Link modems" section.
Baud
Specifies the communication speed used by each device. Modems can be
set to 2400 or 9600 baud. Directly connected devices communicate at 9600
baud.
Name/Comment
Specifies the identifier for each port. This can be used to identify the
location of the device connected to each port in the work environment. For
printer devices, this is the name displayed in the printer menus.
Network Administration Center System Administration and Maintenance Guide Product release 2
Maintenance and administration programs: system running 3-11
Advertisement
Table of Contents
