Northern Telecom NAC User Manual page 215

Table 5-3
Informational error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Bad checksum count exceeded"
linkread
The link has received message(s) with bad checksum.
The task should restart the process by itself. If the problem still persists, call your Northern
Telecom service representative.
"Changing task's name to [%s]"
fxfr
Rename a child process/task name.
Informative; no user intervention is required.
"CHNL_SET time out – %s"
naclink
There is a time out on the channel setting.
Informative; no user intervention is necessary.
"Check task status"
naclink
Indicates the task status information.
Informative; no user intervention is required.
"Cleaned up pipe from applications"
naclink
Informative message indicating the clean up operation on the specified pipe.
No user intervention is required.
"Cleaned up pipe from linkreader"
naclink
Informative message indicating the clean up operation on the specified pipe.
No user intervention is required.
"Cleaned up pipe from maintenance pipe from linkreader"
naclink
Informative message indicating the clean up operation on the specified pipe.
No user intervention is required.
"Cleaned up pipe from NACLINK task"
linkread
Informative message indicating the clean up operation on the specified pipe.
No user intervention is required.
"Created the named pipe [%s]"
ft_server
The named pipe is created.
Informative; no user intervention is necessary.
Network Administration Center System Administration and Maintenance Guide Product release 2
Module
Umprotocol.c
fxfr.c
Ucmis_sub.c
Ucom_hdl.c
Unaclink.c
Unaclink.c
Unaclink.c
Umprotocol.c
ft_server.c
NAC error messages 5-165