Table of Contents
Advertisement
5-68 NAC error messages
Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Cannot open SUPMSG_DIR"
display
A file/directory was not found.
If the system is newly installed, reinstall the system and make sure there are no installation
errors. Otherwise, shut down and restart the system. If the problem persists, call your Northern
Telecom service representative.
"Cannot open SUPMSG_IN"
display
A file/directory was not found.
If the system is newly installed, reinstall the system and make sure there are no installation
errors. Otherwise, shut down and restart the system. If the problem persists, call your Northern
Telecom service representative.
"Cannot open the file %s for reading"
mpsa
A system error has occurred while opening the file '%s' for reading. Try mpsa again. If the
problem persists, call your Northern Telecom service representative.
"Cannot open the named pipe [%s]"
ft_server
A system error has occurred.
Repeat the operation, if the problem reoccurs, then shut down and restart the system. Repeat
the operation again, if the problem persists, call your Northern Telecom service representative.
"Cannot open the named pipe [%s]"
ft_server
A system error has occurred.
Look for other recent messages relevant to this message. If the messages found are serious,
shut down the system and call your Northern Telecom service representative. Otherwise, ignore
this message.
"Cannot process unit name"
cquery
A system error has occurred.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"Cannot read & delete nquery file %s"
cquery
A file/directory was not found for the operation.
Perform the operation again. If the problem still persists, shut down and restart the system.
553-4011-510 Standard 1.0 November 1994
Module
Usupmsg.c
Usupmsg.c
Uprt_info.c
ft_server.c
fxfr.c
Ucquery.c
Ucquery.c
Advertisement
Table of Contents
