Table of Contents
Advertisement
3
Press y to confirm that the system is to be shut down.
After several seconds, the NAC Maintenance and Administration main
menu (system shutdown mode) appears. This menu is described in the
"Maintenance and administration programs: system shutdown" chapter.
4
Press r to select the Restart and Power Down Utilities option.
The Restart and Power Down Utilities submenu appears.
5
Press r to select the Restart the NAC System option.
A prompt appears to confirm that the system is to be restarted.
6
Press y to confirm that the system is to be restarted.
A series of system messages are displayed. This takes a few minutes.
The system stops at a prompt which asks if the time and date are to be
changed. The current date and time appear above this prompt.
7
Enter y at the prompt to indicate that the time and date are to be
changed.
Another prompt appears to enter the new time and date.
8
Enter the new time and date in the format mmddhhmmyy.
This represents the month, day, hour, minutes and year. For example,
enter 0131153095 to represent January 31, 1995, 3:30PM.
After the time and date are entered, they are once again displayed on
the screen. Another prompt appears asking if the time and date have
been entered correctly.
9
Two options are available:
a) Enter y if the entries are correct.
The system continues to reboot. When it is finished, the console login
prompt appears.
or
b) Enter n if the entry is incorrect.
The prompt to enter the new time and date reappears.
Network Administration Center System Administration and Maintenance Guide Product release 2
Maintenance and administration programs: overview 2-3
Advertisement
Table of Contents
