Connecting Interfaces; Available Interfaces; Usb Interface Connection (Standard) - SATO PW4NX Operator's Manual

Connecting Interfaces

Available Interfaces

The product supports the following interfaces.
• The product prints the received data in order of reception. The next received data is
stored in the receive buffer while the first data is printed.
(1) NFC
(2) USB
(3) Bluetooth
(4) Wireless LAN
• The NFC interface supports the handover function that simplifies the Bluetooth/Wi-Fi
connection setup with Android devices. In addition, the NFC interface can be used for
changing product settings with an Android device while the product is powered off and
the power cord is not connected.
• Do not connect or disconnect the interface cables (or use a switch box) with power
supplied to either the product or computer. This may cause damage to the interface
circuitry in the product or computer and is not covered by warranty.

USB Interface Connection (Standard)

Connect the interface cable when the product is powered off.
Connect the USB cable to the USB connector (Mini-B) (1) of the product.
Be careful of the orientation of the USB connector (Mini-B) and connect it correctly.
USB Interface Connection (Standard)
102