Table of Contents
Advertisement
Error Message 1137 (Invalid Dispenser Setup)
When there is an error with the product, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Open and close the top cover or press the
Cause and Countermeasure
Cause
The dispenser unit status is different from the print mode
settings, when printing.
Countermeasure
If the dispenser unit is pulled out, then set [Print Mode]
to [Dispenser]. If the dispenser unit is not set up, then
set something other than [Dispenser].
Contact your SATO technical support if the error cannot be resolved.
Contact Information for When You Are in Trouble
button (CLEAR) or the
Reference
387
button.
Manually Setting the Print Mode
Advertisement
Table of Contents
