Table of Contents
Advertisement
Charging Using the 1Bay Charging Cradle (Option)
•
Do not power on or off the product, connect or disconnect the power cord while your
hands are wet. Doing so could cause an electric shock.
•
Make sure that the AC voltage of your region is in the range of AC 100 - 240 V, 50 -
60 Hz. If your local voltage is not in the stated range, contact your SATO reseller or
technical support.
•
The AC adapter supplied with the 1Bay Charging Cradle is specifically designed
for use with the 1Bay Charging Cradle. You cannot use them for other electrical
equipment.
•
Do not place the 1Bay Charging Cradle in a location that is exposed to splashing water.
Wet terminals can cause fire or electric shock.
1. Connect the AC adapter to the 1Bay Charging Cradle.
a. Turn over the 1Bay Charging Cradle, and then connect the DC plug (3) of the AC adapter (2) to
the DC input jack (1) on its bottom
Pass the DC plug (3) through the 2 protrusions (4) as shown in the following diagram.
b. Connect the AC adapter (2) with the power cord
outlet
.
Charging Using the 1Bay Charging Cradle (Option)
.
, and then plug the power plug into the AC
76
Advertisement
Table of Contents
