Table of Contents
Advertisement
•
The sleep function is disabled if you set the period to 0.
•
When the product transits to the sleep mode during wireless LAN connection, the
product returns to the normal mode after it receives the data. However, if you move
the product temporarily outside the access point connection range, the product is
disconnected from wireless LAN. If you want to reconnect it to the wireless LAN, press
any button to clear the sleep mode.
[Auto Power Off]
Set the time before the product is powered off due to inactivity.
The setting range is 0 to 999 minutes.
The Auto Power-Off function will be disabled in the following cases:
◦
When the product is in settings mode
◦
When the battery is charging
◦
While the product is executing package update
◦
While the product receives the print data
◦
When the following errors occur
▪
Battery Low (error 1043)
▪
Battery Lock (error 1138)
▪
No Battery (error 1060)
•
If you set the time to 0, the Auto Power-Off function will be disabled.
[LCD Brightness]
Set the brightness of the screen.
The setting range is from 1 to 5.
1 is the darkest and 5 is the brightest.
•
The product has a built-in energy saving function, which will decrease the brightness of
the screen when you have not operated the product for a period.
[LCD Rotation]
Set the orientation of the display on the LCD.
The options are as follows:
0 degree
Normal orientation of the display.
215
Advertisement
Table of Contents
