Table of Contents
Advertisement
Item
Operating
Temperature
Storage temperature
Charging temperature
range
Operating Humidity
Storage humidity
Charging humidity
Print
Item
Print Method
Print Speed
Resolution (Head
Density)
Non-printable Area
Description
Standard
-15 to 50 °C (5 to 122 °F) (environment except when printing or feeding)
Linerless Tearoff Mode
5 to 35 °C (41 to 95 °F)
-25 to 60 °C (-13 to 140 °F)
5 to 35 °C (41 to 95 °F)
Standard
10 to 90% RH (Non-condensing)
Linerless Tearoff Mode
30 to 75% RH (Non-condensing)
Standard
10 to 90% RH (Non-condensing)
Linerless Tearoff Mode
30 to 75% RH (Non-condensing)
20 to 80% RH (Non-condensing)
Description
Direct thermal
2 to 6 inches/sec (50.8 to 152.4 mm/sec)
*Dispenser mode, linerless tear-off mode: Maximum 4 inches/sec (101.6
mm/sec)
Note that the speed may be limited depending on the print layout, ambient
temperature or battery level.
203 dpi (8 dots/mm)
Continuous, dispenser, tear-off
Pitch direction (Excludes liner)
Top: 1.5mm (0.06"), Bottom: 1.5 mm (0.06")
Width direction (Excludes liner)
Left: 1.5 mm (0.06"), Right: 1.5 mm (0.06")
395
Advertisement
Table of Contents
