Table of Contents
Advertisement
[SZPL]
To use SZPL as a printer command, set the following items:
[Label]
Set the print position.
The available setting items are as follows.
[Shift]
Set the shift offset position of the label.
The setting range is from -832 to +832 dots.
•
You can change the units to dots, " (inches), or mm in the [System] > [Regional] >
[Unit] menu.
[Top]
Set the top offset position of the label.
The setting range is from -120 to +120 dots.
•
You can change the units to dots, " (inches), or mm in the [System] > [Regional] >
[Unit] menu.
[Label Rotation]
Set the page orientation for label printing.
The label size set in the product is used as a reference for rotation.
The options are as follows:
0 degree
Labels are printed in a portrait orientation.
180 degree
Labels are printed in an inverse-portrait orientation.
[Caret]
Set the caret (^) code.
The setting range is from 0 to 255.
•
You need to set different values for each code (caret, delimiter, tilde).
[Delimiter]
Set the delimiter (,) code.
The setting range is 0 to 255.
206
[SZPL]
Advertisement
Table of Contents
