Table of Contents
Advertisement
•
A message prompting you to restart the product will appear on the Online/Offline
screen if you have made any changes. In such a case, reboot the product to apply the
settings.
[Paper End]
Select the sensor for sensing the paper end.
The options are as follows:
Using I-mark
Use the I-mark sensor (reflective type) to detect the paper end.
Using Gap
Use the Gap sensor (transmissive type) to detect the paper end.
[Prioritize]
For product settings, set whether to prioritize the settings that are done through the product or through
commands.
The options are as follows:
Commands
Prioritize the settings through commands.
Settings
Prioritize the settings through the product.
[Reprint]
Enable or disable the reprint function.
The options are as follows:
Enabled
Enable the reprint function.
Disabled
Disable the reprint function.
If you have selected [Enabled] in [Reprint], you can press the
screen to print the previous data again.
•
The previous data will be lost if you power off the product.
[Print Control]
Set print performance.
The options are as follows:
button (REPRINT) on the Online
155
Advertisement
Table of Contents
