Restore Your Printer; Communications; Interfaces And Requirements - SATO Argox OS-200 User Manual

OS-214EX / OS-200
User Manual

3.2 Restore your printer

By resetting your printer, you can return your printer to the state it was in
when you receive it. This can help you solve some problems caused by
settings changed during the printing.
Do the following to reset your printer:
1. Turn on the printer and wait till both "Ready" indicator and "Power"
indicator stay solid green.
2. Press the "Feed" button for 5 seconds, and the "Ready" indicator and
"Power" indicator will go off in order.
(at this step, if the "FEED" button is pressed for 10 seconds, printer will
reset first >> feed blank labels as media calibration >> and then print
configuration/ self-test labels.)
3. Once "Power" indicator becomes lit again, release the FEED button.
4. "Ready" indicator will then become lit, too. At this moment, the printer
has resumed its factory default settings
Note: Revise the factory default settings that stored in flash, even if turn off
the power source cannot be eliminated.

3.3 Communications

3.3.1 Interfaces and Requirements

This printer comes with USB type A and type B interface, a nine-pin Electronics
Industries Association (EIA) RS-232 serial data interface and Ethernet interface.
29