Table of Contents
Advertisement
5. Use a cotton cloth dampened with cleaning fluid to wipe dirt off the media guides
(4), media roll holder (5), 3 sensors (6), media route around the platen roller (7), and
the platen roller (8).
6. Press the dispenser roller release button (9), and pull out the dispenser unit (10),
and then use a cotton cloth soaked in cleaning fluid to wipe away any dirt.
7. Reload the media if you removed it in step 3.
8. Close the top cover.
Push both ends of the top cover, and close it firmly until it clicks.
•
When closing the top cover, be careful not to pinch your fingers.
330
Cleaning the Inside of the Product
Advertisement
Table of Contents
