Table of Contents
Advertisement
Enabled
The command error is shown and the printing operation is paused when incorrect commands or
parameters are detected in the print data.
Disabled
Ignores incorrect commands or parameters and continues printing operations. The status icon for
command error is displayed.
[Standard Code]
Set the protocol code.
The options are as follows:
Enabled
Use a standard code.
Disabled
Use a non-standard code.
[Orientation]
Select the layout for printing the label.
Portrait
Use a portrait layout. (No rotation)
Landscape
Use a landscape layout. (90-degree rotation)
Inv. Portrait
Use an inverse portrait layout. (180-degree rotation)
Inv. Landscape
Use an inverse landscape layout. (270-degree rotation)
[Font Settings]
Set the font.
The setting items are as follows:
[Zero Slash]
Set whether to print the number zero (0) with or without a slash (/).
This setting is applied to the following bitmap fonts:
U, S, M, WB, WL, XU, XS, XM, XB, XL, X20, X21, X22, X23, X24
The options are as follows:
Enabled
Print zero with a slash.
202
[SBPL]
Advertisement
Table of Contents
