Connecting The Product To The Computer - SATO SG112-ex Driver Manual

1.2

Connecting the Product to the Computer

Before installing the printer driver, connect the product to the computer.
Caution
Power off the product before connecting to the computer.
Connecting via USB cable
One end of the cable to connect the product must be Type B and the other end Type A with a length of
less than 5 meters.
1. Power off the product.
2. Connect the USB cable to the product.
Connect the USB cable (Type B) to the connector shown in the figure.
3. Connect the USB cable to the computer.
Type B
Type A
8