Table of Contents
Advertisement
5. Pull out the fan-fold media that was inserted from the bottom
guide (3) to the width of the fan-fold media
.
6. Close the top cover.
Push both ends of the top cover, and close it firmly until it clicks.
•
When closing the top cover, be careful not to pinch your fingers.
•
Hold the printer stand with your hands to prevent it from falling over.
•
Eject the media in the illustrated direction.
7. Press the
button (FEED) to feed the media.
8. Press the
button (ONLINE) to go to Online mode.
Loading the Fan-fold Media (When Using the Printer Stand (Option))
, and then lower the media guide lock
132
, adjust the media
Advertisement
Table of Contents
