Table of Contents
Advertisement
Enabled
Enable the passphrase.
Disabled
Disable the passphrase.
[Client Key Passphrase]
Set the Passphrase.
Available only if you have selected [Enabled] in the [Enable Client Key Passphrase] menu.
[Errors, Warnings, and Notifications Push Service]
Enable or disable the Error, Warning, and Notifications Push Service.
The options are as follows:
Enabled
When this function is enabled, the push notification of errors and warnings are set to be sent to
the product.
Disabled
Disable the Error, Warning, and Notifications Push Service.
[Advanced]
Set the advanced function for the interface.
The setting item is as follows:
[ARP Announcement]
Set the functions for ARP announcement.
The ARP announcement is useful for updating other hosts mapping of a hardware address when the
IP address or MAC address of the sender has changed.
The available setting items are as follows.
[Additional]
Set the additional ARP announcement.
The options are as follows:
Enabled
Enable the additional ARP announcement. The ARP is sent at 1, 2, 4, 8 and 16 seconds after the
link up/DHCP assignment.
Disabled
Disable the additional ARP announcement. The ARP is only sent at 1 second after the link up/
DHCP assignment.
[Periodic]
Set the interval of the ARP announcement in the range of 0 to 600 seconds.
188
[Network]
Advertisement
Table of Contents
