Table of Contents
Advertisement
Carrying the product
Do not place the
product in areas with
high humidity
AC adapter
Power cord and other
cables
Loading fan-fold media
Loading media roll
Print head
•
Keep the fluid out of reach of children to prevent them from
accidentally drinking it. If a child accidentally drinks the fluid,
immediately consult with a physician.
•
Before moving the product, be sure to power it off, unplug the power
cord from the outlet, and disconnect any connected cables. Moving
the product with the power cord or cables still connected could
damage them, possibly resulting in a fire, electric shock, or damage.
•
Do not place this product in an area with high humidity or where
condensation occurs. If condensation has occurred, immediately
power off the product, and avoid using it until it is dried. Using the
product while condensation is on it could result in a fire, electric
shock, or damage.
•
An AC adapter could become hot. Be careful not to get burned.
•
Grab a power cord and other cables by the plug when removing from
the outlet or connector port. Removing a power cord and other cables
by grabbing the cord/cable area could result in exposure of wires,
breakage, fire, electric shock, or damage.
•
Do not place the power cord and other cables near a heater or other
sources of heat. Doing so could result in melting of the power cord
and other cables sheathing, fire, electric shock, or damage.
•
Be careful not to get injured when handling the media inlet or the
cover.
•
When loading a media roll, be careful not to get your fingers trapped
between the media roll and the supply spindle.
•
The print head is hot after printing. Be careful not to get burned when
replacing media or cleaning immediately after printing.
•
Do not touch the print head with your bare hands. Doing so could
result in injury or damage.
•
To replace the print head, follow the procedure in the Operator
Manual. If the Operator Manual does not contain this procedure,
11
Advertisement
Table of Contents
