SATO PW4NX Operator's Manual page 152

[Every Page]
Perform the head check for each specified number of media.
Appears only if you have selected [Every Page] in the [Head Check Mode] menu.
The setting range is from 1 to 999999.
[Check Media Size]
Enable or disable media size check.
The Media size check function detects a media longer than the media size specified by command, or
the print data larger than the loaded media length.
Appears if you have selected [Gap] or [I-Mark] in the [Sensor Type] menu.
The options are as follows:
Enabled
Enable media size check.
Disabled
Disable media size check.
[Adjustments]
Correct the offset position, print position and print darkness.
The available setting items are as follows.
[Offset]
Correct the offset position.
Offset adjusts the backfeed printing and media stop position for Tear-off/Dispense operation.
Set the value '+' to move the offset position in the direction opposite to the feed direction and '-' to
move in the feed direction.
(1) Feed direction
The setting range is from -30 to +30 dots.
152
[Advanced]