SATO PW4NX Operator's Manual page 349

Error Message 1008 (Out of Paper)
When there is an error with the product, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Open the top cover and load media or press the
Cause and Countermeasure
Cause (1)
The media is not loaded.
Countermeasure (1)
Load the media.
Cause (2)
The media is not loaded correctly.
Countermeasure (2)
Load the media correctly.
Cause (3)
The media sensor level is not set correctly.
Countermeasure (3)
Adjust the media sensor level.
Cause (4)
The media sensor is not operating correctly.
◦ The media sensor is dirty, or there is a
label attached to it.
◦ The media sensor has poor sensitivity.
button (CLEAR) or the
Reference
Loading the Media
Loading the Media
Calibrate
Cleaning the Inside of the Product
Cleaning the Inside of the Product (for
Linerless Models)
349
button.