Table of Contents
Advertisement
When the communication protocol is Status4, Port3 is used.
When the communication protocol is STATUS3, Port1 or Port3 is used.
[Port1]
Set the port number of Port1.
For the two-port connection of Status4, this port is used for receiving print data. For the one-port
connection of Status3, this port is used for both receiving print data and returning the product status.
The setting range is from 1 to 65535.
•
Each port (1, 2 and 3) must be set to different values.
•
Set a port number not used by other services. If port numbers that overlap with those
used by other services are used, communication cannot be performed properly.
[Port2]
Set the port number of Port2.
For the two-port connection of Status4, this port is used for returning the product status.
The setting range is from 1 to 65535.
•
Each port (1, 2 and 3) must be set to different values.
•
Set a port number not used by other services. If port numbers that overlap with those
used by other services are used, communication cannot be performed properly.
[Port3]
Set the port number of Port3.
For the one-port connection of Status3/Status4, this port is used for both receiving print data and
returning the product status.
The setting range is from 1 to 65535.
•
Each port (1, 2 and 3) must be set to different values.
•
Set a port number not used by other services. If port numbers that overlap with those
used by other services are used, communication cannot be performed properly.
161
Advertisement
Table of Contents
