Table of Contents
Advertisement
[Security]
Set the security method of the network. Set the security methods so that the product, host and network
devices match.
The options are as follows:
•
[None]
•
[WEP]
•
[WPA2+WPA]
•
[WPA2]
•
[Dynamic WEP]
If you have selected [Ad-hoc] in the [Mode] menu, only [None] and [WEP] will be available.
[WEP Conf.]
Set the WEP key.
Appears if you have selected [WEP] in the [Security] menu.
The setting items are as follows:
[Authentication]
Set the WEP authentication method.
The options are as follows:
•
[Open System]
•
[Shared Key]
[Key Index]
Set the key index.
Set the key index (WEP key) according to the access point of the wireless LAN you connect.
The setting range is from 1 to 4.
•
Depending on the connecting device, the range of the key index may be 0 to 3. In such
a case, if you have set the product to 1, set the connecting device to 0.
[Key #1] to [Key #4]
Set the WEP key #1 - key #4.
You can enter alphabets (capital and small letters) and numbers.
Depending on the length of the WEP key, the number of characters you can set is as follows:
•
When the key length is 64 bits
ASCII: Five characters
Hexadecimal: 10 characters
•
When the key length is 128 bits
ASCII: Thirteen characters
Hexadecimal: 26 characters
[WPA Conf.]
Set the WPA authentication.
169
Advertisement
Table of Contents
