[Service]; [Factory]; [Wi-Fi Site Survey]; [Install Certificates] - SATO PW4NX Operator's Manual

[Service]

These are the setting items for service.
Strictly for SATO authorized service personnel use.

[Factory]

These are the setting items for factory.
Strictly for SATO authorized service personnel use.

[Wi-Fi Site Survey]

Make a survey of the wave strength for each access point and display or print the survey results.
The selected items are as follows:
SiteSurveyDisp.
Configure Wi-Fi Site Survey.
SiteSurveyPrint
Print Wi-Fi Site Survey.

[Install Certificates]

Install certificates used for Wi-Fi authentication and for HTTPS.
Available only if you have connected the USB memory to the product.
To connect a USB memory to the product, you need a USB host cable (Mini-B).
• Be sure to perform a virus check on the USB memory before connecting it to the
product. SATO Corporation shall not be held responsible for any product malfunctions
caused by a virus spread via USB memory.
The setting items are as follows:
HTTPS
Installs the HTTPS certificates from the USB memory.
Wi-Fi Root CA
Installs the Wi-Fi Root CA certificates from the USB memory.
Wi-Fi Client
Installs the Wi-Fi client certificates from the USB memory.
Wi-Fi Private Key
Installs the Wi-Fi private key from the USB memory.
EAP-FAST PAC File
Installs the EAP-FAST PAC file from the USB memory.
232
[Install Certificates]