SATO PW4NX Operator's Manual page 376

Error Message 1066 (Paper Jam)
When there is an error with the product, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Open the top cover and load the media again.
Cause and Countermeasure
Cause (1)
The media has jammed.
Countermeasure (1)
Remove the jammed media.
Refer to the video for loading the media, for
the media path, and for the operation of each
part inside the product.
Cause (2)
The media is not loaded correctly.
Countermeasure (2)
Load the media correctly.
Cause (3)
Something, such as glue, is stuck to the
media path, and a feed problem has occurred.
Countermeasure (3)
Clean the inside of the product.
Cause (4)
A label is attached to the media sensor.
Reference
Loading the Media
Loading the Media
Cleaning the Inside of the Product
Cleaning the Inside of the Product (for
Linerless Models)
Cleaning the Inside of the Product
376