3. Select [Printing] using the
4. Select the [Advanced] > [Adjustments] > [Offset] menu using the
and then press the
The [Offset] screen appears.
5. Change the setting value. Press the
and then press the
The setting range is from -30 to +30 dots.
•
You can change the units to dots, " (inches), or mm in the [System] > [Regional] >
[Unit] menu.
6. Press the
button (
7. Press the
button to change to Offline mode.
8. Press the
button again to change to Online mode.
You can print to check the adjusted stop position.
/
buttons, and then press the
button.
/
/
button to enter the number to the text box.
) to save the setting value.
293
/
buttons to select a number
button.
/
buttons,