[Battery] Menu; [Health]; [Soh]; [Cycle Counts] - SATO PW4NX Operator's Manual

[Battery] Menu

The following settings are available in the [Battery] menu:

[Health]

Shows the battery condition.
The condition is shown as [Good], [Replace], or [Poor].
You cannot change the setting.

[SOH]

Shows the condition of the battery as a numerical value.
You cannot change the setting.

[Cycle Counts]

Shows the cycle count (charge/discharge cycle).
You cannot change the setting.

[Eco Charge]

Set up the Eco Charge function.
The Eco Charge function is designed to extend the battery life by keeping the after-charged volume of
the battery a little lower than the fully charged volume, thus delaying the degree of deterioration.
The options are as follows:
Enabled
Enable the Eco Charge function.
243