Attaching Cameras And Valves - Epson LS-B Series Manual

4.2 Attaching Cameras and Valves

The Arm #2 has threaded holes as shown in the figure below.
Use M3 screw holes on the top for attaching Ethernet cables, and other equipment.
Use M4 screw holes on the bottom for attaching cameras, valves, and other equipment.
LS3-B
LS6-B
LS-B series Rev.5
LS3-B LS6-B Manipulator 4. Setting of End Effectors
Top view
Top view
[Unit: mm]
Bottom view
Bottom view
*: From base installation surface
41