Epson LS-B Series Manual page 6

Before Reading This Manual
This section describes what you should know before reading this manual.
Structure of Control System
The LS series Manipulators can be used with the following combinations of Controllers and
software.
LS3-B series
LS6-B series
LS10-B series
LS20-B series
iv
Controller : RC90-B
Software : LS3-B: EPSON RC+ 7.0 Ver.7.4.4 or later
LS3-B401S-V1*: EPSON RC+ 7.0 Ver.7.5.1B or later
* LS3-B401S-V1* is high speed model manipulator of LS3-B401S.
This manual describes information on LS3-B401S-V1 which is
different from LS3-B401S.
Controller : RC90-B
Software : LS6-B : EPSON RC+ 7.0 Ver.7.4.3 or later
LS6-B602S-V1* : EPSON RC+ 7.0 Ver.7.5.0 R3 or later
* LS6-B602S-V1 is high speed model manipulator of LS6-B602S. This manual
describes information on LS6-B602S-V1 which is different from LS6-B602S.
Controller : RC90-B
Software : EPSON RC+ 7.0 Ver.7.4.2 or later
Controller : RC90-B
Software : EPSON RC+ 7.0 Ver.7.4.5 or later
LS-B series Rev.5