Warning Labels - Epson LS-B Series Manual

LS10-B Manipulator 1. Safety

1.8 Warning Labels

The Manipulator has the following warning labels.
The warning labels are attached around the locations where specific dangers exist.
Be sure to comply with descriptions and warnings on the labels to operate and maintain the
Manipulator safely.
Do not tear, damage, or remove the warning labels. Use meticulous care when handling
those parts or units to which the following warning labels are attached as well as the nearby
areas.
Location
A
B
C
D
Location
1
78
Warning Label
Signature label
-
NOTE
Before loosening the base mounting screws,
hold the arm and secure it tightly with a band
to prevent hands or fingers from being caught
in the Manipulator.
Do not enter the operation area while the
Manipulator is moving.
collide against the operator. This is extremely
hazardous and may result in serious safety
problems.
Hazardous voltage
Manipulator is ON. To avoid electric shock,
do not touch any internal electric parts.
You can catch your hand or fingers between
the shaft and cover when bringing your hand
close to moving parts.
* Manipulators with bellows do not have this
label since there is no danger of being your
hand or fingers caught.
NOTE
Indicates Product name, Model name,
Manipulator's serial No., Local codes
information, Specification, Manufacturer,
Importer, Date of manufacture, Country of
manufacture, etc.
For details, refer to the attached label.
The robot arm may
exists while the
LS-B series Rev.5