Part Names And Outer Dimensions; Ls3-B - Epson LS-B Series Manual

2.2 Part Names and Outer Dimensions

2.2.1 LS3-B

Standard Model (LS3-B401S)
Arm #2
Signature label
(Serial No.
of Manipulator)
NOTE - The brake release switch affects Joints #3. When the brake release switch is pressed in

- While the LED lamp is ON, current is being applied to the manipulator. Performing
LS-B series Rev.5
Joint #3
Brake release switch
Arm #1
Shaft
emergency mode, the brake for Joint #3 is released.
any work with the power ON is extremely hazardous and it may result in electric shock
and/or improper function of the robot system. Make sure to turn OFF the controller
power before the maintenance work
LS3-B LS6-B Manipulator 2. Specifications
LED lamp
Fittings (blue)
for ø6 mm
pneumatic tube
Fittings (white)
for ø6 mm
pneumatic tube
Fittings (blue)
for ø4 mm
pneumatic tube
Ethernet connector
User connector
(15-pin
D-sub connector)
Signal cable
Power cable
17