Maintaining The Acx4000 Uplink Ports - Juniper ACX4000 Hardware Manual

Maintaining the ACX4000 Uplink Ports

IN THIS SECTION
Purpose | 121
Action | 121
Purpose
For optimum performance, verify the condition of the uplink ports.
Action
On a regular basis:
• Check the port LEDs. The meaning of the LED states differs for various uplink ports. For more
information, see "ACX4000 LEDs Overview" on page
router generates an alarm message to be sent to the Routing Engine.
A green status LED indicates that the port is functioning normally.
• From the CLI, issue the show chassis fpc pic-status command.
user@host> show chassis fpc pic-status
Slot 0 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
SEE ALSO
ACX4000 Routers Hardware and CLI Terminology Mapping | 4
16x CHE1T1, RJ48
8x 1GE(LAN) RJ45
2x 1GE(LAN) SFP
2x 10GE(LAN) SFP+
52. If the router detects a port failure, the
121