Console Or Auxiliary Port Connector Pinout On Acx Series Routers - Juniper ACX4000 Hardware Manual

Table 28: Management Port Connector Pinout Information
Pin Description
1 TRD[0]-
2 TRD[0]+
3 TRD[1]-
4 TRD[1]+
5 TRD[2]-
6 TRD[2]+
7 TRD[3]-
8 TRD[3]+

Console or Auxiliary Port Connector Pinout on ACX Series Routers

The port labeled CONSOLE/AUX on the front panel is an asynchronous serial interface that accept an
RJ-45 connector. Use a cable with the pinouts described in
Routing Engine to an auxiliary or console management device.
NOTE: You must use a shielded twisted pair (STP) cable for both outdoor and indoor
deployments.
Direction
In/Out
In/Out
In/Out
In/Out
In/Out
In/Out
In/Out
In/Out
Table 29 on page 91 to connect the
90