Juniper ACX4000 Hardware Manual page 75

DC Power Cable Lug Specifications
Use cable lugs with the specifications shown in
the DC power supply.
Figure 12: DC Power Cable Lug
CAUTION: Before router installation begins, a licensed electrician must attach a cable
lug to the grounding and power cables that you supply. A cable with an incorrectly
attached lug can damage the router.
DC Power Cable Specifications
You must supply two DC power cables for each DC power supply that meet the following specifications:
2
14-AWG (2.08 mm ), minimum 60° C wire, or as required by the local code.
SEE ALSO
ACX4000 DC Power Electrical Safety Guidelines | 191
DC Power Copper Conductors Warning | 193
DC Power Disconnection Warning | 193
DC Power Grounding Requirements and Warning | 195
DC Power Wiring Sequence Warning | 195
DC Power Wiring Terminations Warning | 197
Figure 12 on page 66 to attach each DC power cable to
66