Juniper ACX4000 Hardware Manual page 15

Table 1: CLI Equivalents of Terms Used in Documentation for ACX4000 Routers
Hardware Description (as
Item (as displayed in the
displayed in CLI)
the CLI)
2x 1GE(LAN) SFP
2x 10GE(LAN)
SFP+
<MIC 0
description>
<MIC 1
description>
n )
Xcvr ( Abbreviated name
of the transceiver
n )
PEM ( Power supply
n )
Fan Tray ( Fan Tray
Value (as displayed Item in Documentation
in the CLI)
FPC 0, PIC 1 Built-in network ports on
the front panel of the
router
FPC 0, PIC 2 Built-in network ports on
the front panel of the
router
FPC 1, PIC 0 MIC installed in slot 0
FPC 1, PIC 1 MIC installed in slot 1
n is a value
Optical transceivers
equivalent to the
number of the port
in which the
transceiver is
installed.
n is a
Value of AC or DC power supply
value in the range
of 0–1.
n is
Value of Fan tray module
always 0.
(Continued)
Additional Information
"ACX4000 Uplink Ports
Overview" on page 44
"ACX4000 Uplink Ports
Overview" on page 44
"ACX4000 Modular
Interface Card (MIC)
Overview" on page 51
"ACX4000 Modular
Interface Card (MIC)
Overview" on page 51
"ACX4000 Modular
Interface Card (MIC)
Overview" on page 51
"ACX4000 Power
Overview" on page 58
"ACX4000 Cooling
System" on page 56
6