Juniper ACX4000 Hardware Manual page 123

8. Configure the router's domain name.
[edit]
root@# set system domain-name
9. Configure the IP address and prefix length for the router's Ethernet interface.
[edit]
root@# set interfaces fxp0 unit 0 family inet address
10. Configure the IP address of a backup router, which is used only while the routing protocol is not
running.
[edit]
root@# set system backup-router
11. Configure the IP address of a DNS server.
[edit]
root@# set system name-server
12. Set the root authentication password by entering either a clear-text password, an encrypted
password, or an SSH public key string (DSA or RSA).
[edit]
root@# set system root-authentication plain-text-password
password
New password:
Retype new password:
or
[edit]
root@# set system root-authentication encrypted-password
or
[edit]
root@# set system root-authentication ssh-dsa
domain-name
address
address
password
address/prefix-length
encrypted-password
public-key
114