Juniper ACX4000 Hardware Manual page 134

CAUTION: Do not let fiber-optic cables hang free from the connector. Do not allow
the fastened loops of a cable to dangle, which stresses the cable at the fastening
point.
CAUTION: Avoid bending a fiber-optic cable beyond its minimum bend radius. An
arc smaller than a few inches in diameter can damage the cable and cause problems
that are difficult to diagnose.
11. Bring the MIC online by issuing the following CLI command:
user@host> request chassis mic fpc-slot slot-number mic-slot slot-number online
The normal functioning status LED confirms that the MIC is online. You can also verify correct MIC
functioning by issuing the show chassis fpc pic-status command described in
ACX4000 Uplink Ports" on page
Figure 26: Installing a MIC
SEE ALSO
ACX4000 Modular Interface Card (MIC) Overview | 51
Maintaining Cables That Connect to ACX4000 Network Ports | 119
121.
"Maintaining the
125