Juniper ACX4000 Hardware Manual page 56

Gigabit Ethernet Ports
The GE ports described in
NOTE: You can use Gigabit Ethernet transceivers in the GE ports, or you can use 10-Gigabit
Ethernet transceivers in the XE ports. Use one set of ports at a time.
Table 6: SFP Port Features
Feature Description
Supported standards See the Hardware Compatibility Tool for the specifications of transceivers supported on
the ACX4000. The list of supported transceivers for the ACX4000 is located at
pathfinder.juniper.net/hct/product/#prd=ACX4000.
Cable
Connector
Port numbering 0/2/0 and 0/2/1
(hardware)
Port numbering ge-0/2/0
(software)
10-Gigabit Ethernet Ports
The ports labeled XE are numbered 0/3/0 and 0/3/1 allow you to install the 10-Gigabit Ethernet
transceivers listed in Table 7 on page
The XE ports described in
NOTE: You can use Gigabit Ethernet transceivers in the GE ports, or you can use 10-Gigabit
Ethernet transceivers in the XE ports. Use one set of ports at a time.
Table 6 on page 47 support small form-factor pluggable (SFP) transceivers.
ge-0/2/1
and
48.
Table 7 on page 48 support SFP+ transceivers.
47
https:/ /