Before You Begin; Connecting The Sun Storagetek 5320 Nas Cluster Appliance To Back-End Storage; Connecting The Sun Storagetek 5320 Nas Cluster Appliance To Controller Enclosures - Sun Microsystems StorageTek 5320 Getting Started Manual

Before You Begin

Before connecting the system, you must install the units in the rack. Refer to
"Installing Servers and Back-End Storage" on page 11
Connecting the Sun StorageTek 5320
NAS Cluster Appliance to Back-End
Storage
This section describes how to cable the Sun StorageTek 5320 NAS Cluster Appliance
to the controller enclosures and the controller enclosure to the optional expansion
enclosures for several different configurations.
This section includes the following tasks:
"Connecting the Sun StorageTek 5320 NAS Cluster Appliance to Controller
■
Enclosures" on page 76
"Connecting the Controller Enclosures to Expansion Enclosures" on page 81
■
Connecting the Sun StorageTek 5320 NAS Cluster
Appliance to Controller Enclosures
The Sun StorageTek 5320 NAS Cluster Appliance and the controller enclosures (CUs)
each connect with a pair of optical fiber cables. Optical SFP transceivers have been
installed in the controller enclosures' host ports to interface with the optical fiber
cable's LC connectors. Refer to
76 Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide • May 2006
for port locations.
FIGURE 4-1
for rackmount instructions.