Table of Contents
Advertisement
Controller Enclosure and One Expansion Enclosure Cable Interconnection
FIGURE 4-5
1. Connect one Active Copper cable between the A side expansion port of the
controller enclosure and the A side port 1 of the expansion enclosure.
2. Connect one Active Copper cable between the B side expansion port of the
controller enclosure and the B side port 2 of the expansion enclosure.
Note – The A side port 2 and B side port 1 of the expansion enclosure remain
empty.
▼
To Cable a Controller Enclosure to Two Expansion
Enclosures
To connect a controller enclosure and two expansion enclosures, four 2-meter Active
Copper cables are required. Refer to
A
FIGURE 4-6
Chapter 4 Installing the Sun StorageTek 5320 NAS Cluster Appliance
B
.
Controller enclosure
Expansion enclosure
83
Advertisement
Table of Contents
