Table of Contents
Advertisement
Back-End Storage Cabling
When you have finished installing all units and servers and connected their power
cables, you are ready to connect the servers to the controller units and the controller
units to the (optional) expansion units as described in subsequent chapters.
Use the chapter appropriate to the system that you are setting up.
To connect:
Single-server Sun StorageTek 5320 NAS
Appliance to back-end storage
Dual-server Sun StorageTek 5320 NAS
Cluster Appliance to back-end storage
Sun StorageTek 5320 NAS Gateway System
to SAN storage
Refer to:
Chapter 3
Chapter 4
Chapter 5
Chapter 2 Installing Servers and Back-End Storage
51
Advertisement
Table of Contents
