To Cable A Controller Enclosure To Three Expansion Enclosures; Figure 3-8 Controller Enclosure And Three Expansion Enclosures Cable Interconnection - Sun Microsystems StorageTek 5320 Getting Started Manual

▼
To Cable a Controller Enclosure to Three Expansion
Enclosures
To connect a controller enclosure and three expansion enclosures, six 2-meter Active
Copper cables are required. Refer to
FIGURE 3-8
Caution – Do not mix EU F (Fibre Channel) and EU S (SATA) expansion enclosures
attached to a controller enclosure.
1. Connect one Active Copper cable between the A side expansion port of the
controller enclosure and the A side port 1 of expansion enclosure 1.
2. Connect one Active Copper cable between the A side port 2 of expansion
enclosure 1 and the A side port 1 of expansion enclosure 2.
3. Connect one Active Copper cable between the A side port 2 of expansion
enclosure 2 and the A side port 1 of expansion enclosure 3.
4. Connect one Active Copper cable between the B side expansion port of the
controller enclosure and B side port 2 of expansion enclosure 3.
62 Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide • May 2006
A
Controller Enclosure and Three Expansion Enclosures Cable Interconnection
.
FIGURE 3-8
B
Controller enclosure
Expansion enclosure 1
Expansion enclosure 2
Expansion enclosure 3