Before You Begin
Before connecting the system, you must install the units in the rack. Refer to
"Installing Servers and Back-End Storage" on page 11
Connecting the Sun StorageTek 5320
NAS Appliance to Back-End Storage
This section describes how to cable the Sun StorageTek 5320 NAS Appliance to
backend storage, for several different configurations.
This section includes the following tasks:
"Connecting the Sun StorageTek 5320 NAS Appliance to Controller Enclosures"
■
on page 54
"Connecting Controller Enclosures to Expansion Enclosures" on page 59
■
Connecting the Sun StorageTek 5320 NAS
Appliance to Controller Enclosures
The Sun StorageTek 5320 NAS Appliance connects to each controller enclosure with
a pair of optical fiber cables. Optical SFP transceivers have been installed in the
controller host channel ports to interface with the optical fiber cable's LC connectors.
Refer to
54
Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide • May 2006
for port locations.
FIGURE 3-1
for rackmount instructions.