Connecting The Sun Storagetek 5320 Nas Gateway System To The Sun Storagetek Flexline 200 And 300 Series; Connecting Directly To The Flexline 200 And 300 Series; To Connect A Single-Server Direct Attach To Sun Storagetek Flexline 200 And 300 Series - Sun Microsystems StorageTek 5320 Getting Started Manual

Connecting the Sun StorageTek 5320
NAS Gateway System to the Sun
StorageTek FlexLine 200 and 300 Series
This section describes how to cable the Sun StorageTek 5320 NAS Gateway System
directly or through fabric switches to the Sun StorageTek FlexLine 200 and 300 series
systems:
"Connecting Directly to the FlexLine 200 and 300 Series" on page 114
■
"Using Fabric Switches to Connect to the Sun StorageTek FlexLine 200 and 300
■
Series" on page 117
After connecting the systems, proceed to
Note – All figures in this section show the FlexLine 380 system. Cabling for the
FlexLine 240 and FlexLine 280 is similar to the 380.
Connecting Directly to the FlexLine 200 and 300
Series
You can direct connect a single server or a dual server to the Sun StorageTek
FlexLine series array.
▼
To Connect a Single-Server Direct Attach to Sun StorageTek
FlexLine 200 and 300 Series
You can connect to SAN storage with one or two pairs of optical fiber cables. Using
two pairs to connect all HBA ports ensures redundancy and improves processing
speed.
1. Connect the HBA Port 1 of the first HBA card (PCI1) to the first available port on
the Sun StorageTek FlexLine 200 and 300 series.
114 Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide • May 2006
"Connecting to the Network" on page 159.