Using Fabric Switches To Connect To The Sun Storedge 6920 System; To Connect A Single-Server Fabric Attach To Sun Storedge 6920 System - Sun Microsystems StorageTek 5320 Getting Started Manual

Using Fabric Switches to Connect to the Sun
StorEdge 6920 System
The following fabric attach configurations are described in this section:
"To Connect a Single-Server Fabric Attach to Sun StorEdge 6920 System" on
■
page 132
"To Share All Sun StorEdge 6920 System LUNs Between All Port Pairs" on
■
page 134
"To Connect Dual-Server High-Availability Fabric Attach to the Sun StorageTek
■
6920 System" on page 136
Note – Do not power on the server until instructed in
StorageTek 5320 NAS Gateway System" on page
▼
To Connect a Single-Server Fabric Attach to Sun StorEdge
6920 System
You can connect to SAN storage with one or two pairs of optical fiber cables. Using
two pairs to connect all HBA ports and using two switches ensures redundancy and
improves processing speed.
1. Connect the HBA Port 1 of the first HBA card (PCI1) to the first available port of
the first fabric switch.
2. Connect the HBA Port 1 of the second HBA card (PCI0) to the first available port
of the second fabric switch.
3. Connect an available port on the first switch to the first available port on the Sun
StorEdge 6920 system.
132 Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide • May 2006
"Powering On the Sun
161.