To Connect One Controller Enclosure - Sun Microsystems StorageTek 5320 Getting Started Manual

Nas appliance and gateway system
Table of Contents

Advertisement

Controller A Host 1 port
Host 2 port
Sun StorageTek 5320 NAS Appliance HBA Cards and Controller
FIGURE 3-1
Enclosure Ports
Note – HBA cards are inserted only in the far left on the low-profile riser assembly
of the Sun StorageTek 5320 NAS Appliance.
This section contains details on the following:
"To Connect One Controller Enclosure" on page 55
"To Connect Two Controller Enclosures" on page 57

To Connect One Controller Enclosure

Use the instructions in this section if you are connecting one controller enclosure to
the Sun StorageTek 5320 NAS Appliance.
For a Sun StorageTek 5320 NAS Appliance with one dual port HBA card
(
):
FIGURE 3-2
1. Connect the HBA port 2 on the Sun StorageTek 5320 NAS Appliance to the
Controller A host 1 port.
2. Connect the HBA port 1 on the Sun StorageTek 5320 NAS Appliance to the
Controller B host 1 port.
Second HBA card
(PCI0)
Controller B Host 1 port
Host 2 port
Chapter 3 Connecting the Sun StorageTek 5320 NAS Appliance
First HBA card
(PCI1)
Sun StorageTek 5320
NAS Appliance
5300 RAID EU
controller enclosure
55

Advertisement

Table of Contents
loading

Table of Contents