To Cable A Controller Enclosure To Seven Expansion Enclosures; Figure 3-9 Controller Enclosure And Seven Expansion Enclosures Cable Interconnection - Sun Microsystems StorageTek 5320 Getting Started Manual

▼
To Cable a Controller Enclosure to Seven Expansion
Enclosures
To connect a controller enclosure and seven expansion enclosures, fourteen 2-meter
Active Copper cables are required. Refer to
FIGURE 3-9
Caution – Do not mix EU F (Fibre Channel) and EU S (SATA) expansion enclosures
attached to a controller enclosure.
1. Connect one Active Copper cable between the A side expansion port of the
controller enclosure and the A side port 1 of expansion enclosure 1.
64 Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide • May 2006
A
Controller Enclosure and Seven Expansion Enclosures Cable Interconnection
.
FIGURE 3-9
Controller enclosure
Expansion enclosure 1
Expansion enclosure 2
Expansion enclosure 3
Expansion enclosure 4
Expansion enclosure 5
Expansion enclosure 6
Expansion enclosure 7
B