Figure 2-12 Securing The Enclosure To The Front Of A Sun Rack 900/1000 Cabinet - Sun Microsystems StorageTek 5320 Getting Started Manual

For a Sun Rack 900/1000 cabinet, use the No. 3 Phillips screwdriver to install and
■
tighten four M6 screws (two per side) to secure the enclosure to the front of the
cabinet (
FIGURE 2-12
5. Replace the left and right end caps to hide the front mounting screws.
The end caps snap onto the front bezel of the tray.
32 Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide • May 2006
).
FIGURE 2-12
Securing the Enclosure to the Front of a Sun Rack 900/1000 Cabinet