Table of Contents
Advertisement
■
■
■
The rackmount kit contains two slide rail assemblies. A slide rail assembly can be
installed on either the right or left side of the rack.
A slide rail assembly consists of two parts: a slide rail and a removable mounting
bracket. The slide rail attaches to the rack posts. The mounting bracket attaches to
the server chassis.
To Prepare the Server
▼
1. Unpack the unit.
2. Check the contents of the box for the following items:
Sun StorageTek 5320 NAS Appliance or Sun StorageTek 5320 NAS Cluster
■
Appliance or Sun StorageTek 5320 NAS Gateway System (single server or dual
server)
Ship kit for the server
■
3. Be sure you have the power cords (two per server), which were shipped
separately.
To Prepare the CAM100 3RU Rackmount Kit
▼
Note – For NAS head installation, refer to the Sun LX50/Sun Fire V60x/Sun Fire
V65x rail-mounting kit rail kit instructions.
Unpack the rackmount kit and check the contents. The CAM100 3RU rail kit contains
the following items:
Left front (P/N 341-04443-01) and back (P/N 341-0444) rails
■
Right front (P/N 341-04445-01) and back (P/N 341-0446) rails
■
16
Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide • May 2006
Package of mounting screws and nuts in assorted sizes to fit various types of
racks and cabinets
Cable management arm with six preinstalled cable clips
Manufacturer's instruction sheet for the cable management arm
Advertisement
Table of Contents
