Table of Contents
Advertisement
b. Adjust the length of the slide rail by sliding the back mounting flange to reach
the outside edge of the back rack post.
c. Loosely attach the back of the slide rail to the back rack post with two screws.
7. Attach the second slide rail to the left rack posts in a similar manner. Again, do
not tighten the screws.
8. Use the slide rail spacing tool to adjust the distance between the slide rails:
a. At the front of the rack, plug the left side of the tool into slots at the end of the
left rail (
FIGURE 2-19
Using the Slide Rail Spacing Tool to Adjust the Distance Between the Slide
FIGURE 2-19
Rails
).
Chapter 2 Installing Servers and Back-End Storage
39
Advertisement
Table of Contents
