To Cable A Controller Enclosure To Seven Expansion Enclosures - Sun Microsystems StorageTek 5320 Getting Started Manual

Note – The A side port 2 of expansion enclosure 3 and the B side port 1 of
expansion enclosure 1 remain empty.
▼
To Cable a Controller Enclosure to Seven Expansion
Enclosures
To connect a controller enclosure and seven expansion enclosures, fourteen 2-meter
Active Copper cables are required. Refer to
FIGURE 4-8
86 Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide • May 2006
A
Controller Enclosure and Seven Expansion Enclosures Cable Interconnection
.
FIGURE 4-8
Controller enclosure
Expansion enclosure 1
Expansion enclosure 2
Expansion enclosure 3
Expansion enclosure 4
Expansion enclosure 5
Expansion enclosure 6
Expansion enclosure 7
B